UHF AZ-H3-S11
Higgs-3 / Higgs-4 UHF RFID Inlay, AZ-H3-S11
- Chip options
- Higgs-3 / Higgs-4
- Antenna size
- On request
AZ-H3-S13
Higgs-3 / Higgs-4 UHF RFID Inlay, AZ-H3-S13
Higgs-3 / Higgs-4 UHF RFID inlay design; antenna dimensions and test data are available on request.
Full dimensions for this design are available on request. Ask for the specification and samples before ordering.
Validate samples first. Engineer reply within 24 h.
| SKU | AZ-H3-S13 |
|---|---|
| Frequency | UHF 860–960 MHz |
| Protocol | EPC Gen2 (ISO/IEC 18000-63), RAIN RFID |
| Chip options | Alien Higgs-3, Alien Higgs-4 |
| Antenna size | On request |
| Format | Inlay (dry / wet / label) |
| Typical applications | Libraries & archives |
Design and application notes
Higgs-3 / Higgs-4 UHF RFID Inlay, AZ-H3-S13 is a passive UHF RFID inlay design with a choice of Alien Higgs-3 or Alien Higgs-4 chips on a dipole antenna for the 860–960 MHz band. Its antenna dimensions are shared on request: tell us the item and the label position, and we will confirm whether it fits and send samples.
The same antenna design is offered with Alien Higgs-3 or Alien Higgs-4; each tag carries one of them. The options differ mainly in memory: Alien Higgs-3 has 96-bit EPC extensible to 480 bits, 512-bit user memory, 64-bit unique TID; Alien Higgs-4 has up to 128-bit EPC (96-bit nominal), 128-bit user memory, 64-bit unique TID. Datasheet read sensitivity (bare chip): up to −18 dBm for Higgs-3, up to −18.5 dBm for Higgs-4. Tell us which chip your system expects, or ask us to recommend one for your application.
We do not publish a read range for this design. Range depends on the reader, antenna, power and tagged material, so ask us for test data or samples for your setup.
It is typically used for library books and media. The application pages below give chip and size recommendations for each industry.
Order it as a dry inlay for your own converting, a wet inlay with adhesive and liner, or a finished label, blank or printed and EPC-encoded. We ship samples first so you can validate on your own items and readers, then quote the format you tested.
Order in the format you need
Confirm the construction and encoding during sampling, then quote the configuration you validated.
Dry inlay
Chip and antenna on a PET carrier without adhesive, for your own converting, hang tags or lamination.
Wet inlay
The same inlay with pressure-sensitive adhesive on a liner, applied like a sticker.
Label
Paper or synthetic face stock over the inlay, blank or printed, ready for RFID printers.
Custom
Other label sizes, face stocks, adhesives, printing, encoding and roll formats on request.
How ordering works
- 01
Specify
Share surface, read distance, chip preference and volume. We shortlist tags that fit.
- 02
Sample
Receive sample tags of the shortlisted designs to try in your own setup.
- 03
Validate
Test on your items, readers and printers. We adjust chip, size or format if needed.
- 04
Produce & ship
Volume production with 100% inline electrical test, then export shipping.
Frequently asked questions
Can I order the AZ-H3-S13 as a wet inlay or a printed label?
Yes. The same chip and antenna are available as a dry inlay (no adhesive), a wet inlay (adhesive on a liner) or a label with paper or synthetic face stock, blank or printed. EPC encoding and custom label sizes are quoted on request; see custom tags.
What read range will I get with the AZ-H3-S13?
We do not publish a read range for this design. Real-world range depends on the reader, antenna, power and the tagged material, so we recommend testing samples in your setup.
How do I get samples and a quote for the AZ-H3-S13?
Use the quote button on this page or request samples. Tell us the item, surface, read distance and annual volume; an engineer replies within 24 hours with a recommendation and a sample plan.
Selection guides
-
Dry Inlay, Wet Inlay or RFID Label: What Are You Buying?
Understand dry inlays, adhesive wet inlays and converted labels. Specify the antenna, finished dimensions and roll format so your RFID order is usable.
-
UCODE, Monza and Higgs: Compare UHF RFID Chips
Compare UHF chip memory, reader features and lifecycle support. Use official datasheets to shortlist chips, then test the complete inlay on your items.
Related designs
UHF 
UHF AZ-H3-S01
Higgs-3 / Higgs-4 UHF RFID Inlay, AZ-H3-S01
- Chip options
- Higgs-3 / Higgs-4
- Antenna size
- On request
UHF AZ-H3-S06
Higgs-3 / Higgs-4 UHF RFID Inlay, AZ-H3-S06
- Chip options
- Higgs-3 / Higgs-4
- Antenna size
- On request
UHF AZ-H3-S07
Higgs-3 / Higgs-4 UHF RFID Inlay, AZ-H3-S07
- Chip options
- Higgs-3 / Higgs-4
- Antenna size
- On request
Talk to an RFID engineer
Not sure which tag fits your project?
Send the surface, read distance and volume. An engineer replies within 24 hours with a recommendation and a sample plan.
Email us: sales@antenza.com