NXP · NTAG

NXP NTAG213 RFID chip

Smart posters, product authentication, NFC shelf labels and Bluetooth / Wi-Fi pairing

Vendor chip reference
Chip NXP NTAG213
Vendor NXP
Frequency HF 13.56 MHz
Protocol ISO/IEC 14443-A, NFC Forum Type 2
Memory 144 bytes of user memory (NDEF), 7-byte UID

Chip capabilities and selection notes

Readable by NFC phones, 32-bit password protection, ECC originality signature, NFC counter with ASCII mirror and FAST_READ.

The chip is one part of the RFID design. Antenna geometry, label layers, tagged material and reader setup all influence the result. Confirm the footprint, data format and mounting condition when requesting samples.

Read the NXP NTAG213 vendor datasheet ↗

Four checks before approving a chip and tag

  1. Match the protocol and equipment

    Confirm the protocol supported by the actual reader, phone and application, plus the deployment region and read workflow.

  2. Check memory for the actual format

    Provide the complete encoded content and check usable memory and format overhead. For NDEF, validate the message against the actual declared capacity.

  3. Validate the antenna, item and encoding

    Apply candidate tags to real items, test with the intended equipment settings, and read back the content and identifier mapping.

  4. Confirm supply and sample acceptance

    Check chip lifecycle and current supply terms. Agree sample configuration, acceptance criteria and quotation in writing before deciding on volume.

Tag designs using NXP NTAG213

A design may list this chip as its standard IC or as an ordering option. Confirm the exact configuration with your RFQ.

How ordering works

  1. 01

    Specify

    Share surface, read distance, chip preference and volume. We shortlist tags that fit.

  2. 02

    Sample

    Receive sample tags of the shortlisted designs to try in your own setup.

  3. 03

    Validate

    Test on your items, readers and printers. We adjust chip, size or format if needed.

  4. 04

    Produce & ship

    Volume production with 100% inline electrical test, then export shipping.

Frequently asked questions

How do I choose a tag with NXP NTAG213?

Match the reader protocol and required memory first, then compare antenna size and mounting material. Test the finished tag on the intended object before a volume order.

Can the datasheet tell me how far the label reads?

Chip specifications describe the integrated circuit. Finished-tag read range depends on the antenna, reader, power and tagged material; use measured sample results for qualification.

Can I request another format or chip option?

Share the desired footprint, format and encoding requirements. We will confirm a suitable chip and antenna combination and arrange the sample configuration before quoting bulk.

Talk to an RFID engineer

Not sure which tag fits your project?

Send the surface, read distance and volume. An engineer replies within 24 hours with a recommendation and a sample plan.

Email us: sales@antenza.com

Email us Get a quote