AZ-N213-S05
NTAG213 NFC Tag, AZ-N213-S05
NTAG213 NFC tag; validate the complete message and expected action on the target phone, OS and application. Supplied as dry inlay, wet inlay (sticker) or printed label.
Full dimensions for this design are available on request. Ask for the specification and samples before ordering. Request specifications
Validate samples first. Engineer reply within 24 h.
See the sample validation checklist
| SKU | AZ-N213-S05 |
|---|---|
| Frequency | HF 13.56 MHz (NFC) |
| Protocol | ISO/IEC 14443-A, NFC Forum Type 2 |
| Chip | NXP NTAG213 |
| Memory | 144 bytes of user memory (NDEF), 7-byte UID |
| Antenna size | On request |
| Format | Inlay (dry / wet / label) |
| Typical applications | Retail inventory, Cosmetics & beauty |
Design and application notes
This NFC tag pairs the NXP NTAG213 chip with an HF coil antenna working at 13.56 MHz and following ISO/IEC 14443-A, NFC Forum Type 2. The phone or HF reader and application must support the protocol and data format. Read back the complete NDEF message on the target phone, OS and application and verify the intended page or action. A static URL alone does not prove product authenticity.
NXP NTAG213 provides 144 bytes of user memory (NDEF), 7-byte UID. It follows ISO/IEC 14443-A, NFC Forum Type 2. Datasheet highlights: 32-bit password protection, ECC originality signature, NFC counter with ASCII mirror and FAST_READ.
Full dimensions for this design are available on request. Reading performance depends on the reader antenna, tag antenna size and surrounding material. Read back the complete sample content on the actual item with the intended equipment to confirm that the configuration meets the workflow.
It is typically used for item-level labels for store inventory and cosmetic bottles, jars and caps. The application pages below give chip and size recommendations for each industry.
Order it as a dry inlay for your own converting, a wet inlay with adhesive and liner, or a finished label, blank or printed, with data such as an NDEF URL encoded and locked. We ship samples first so you can validate on your own items and readers, then quote the format you tested.
Specification basis and validation
Vendor documents describe the chip, not finished-tag read range.
Confirm catalog dimensions against the final tag construction. Reference read ranges require sample testing on your item with your reader setup.
Order in the format you need
Confirm the construction and encoding during sampling, then quote the configuration you validated.
Dry inlay
Chip and antenna on a PET carrier without adhesive, for your own converting, hang tags or lamination.
Wet inlay
The same inlay with pressure-sensitive adhesive on a liner, applied like a NFC sticker.
Label
Paper or synthetic face stock over the inlay, blank or printed, with data encoded and locked.
Custom
Other label sizes, face stocks, adhesives, printing, encoding and roll formats on request.
What should the sample pass before a bulk order?
Agree the actual use conditions and pass criteria before selecting samples. The catalogue supports shortlisting; confirm finished-tag performance and delivery configuration in writing and through sample validation.
-
Validate the target phones and complete message
Record phone models, OS and application versions. On the final packaging, read back the longest planned complete NDEF message and check its content, destination page or expected action. Frequency or chip name alone does not confirm the phone workflow.
-
Confirm capacity, mapping and access settings
Check the actual chip and usable area for the format, including NDEF record and storage overhead. Reconcile item and printed IDs. Keep early samples rewritable; approve locks from the chip documentation after content validation. A static link is not product authentication.
-
Record the approved construction and delivery configuration
Record the SKU, sample revision, lot, device settings, results and approver. Confirm final dimensions, materials, printing, encoding, quantity and delivery requirements, and agree which configuration changes require another trial.
Use the test record to save actual conditions and results. English and Chinese worksheets are provided; the agreed reviewer determines acceptance.
Download test recordHow ordering works
- 01
Specify
Share surface, read distance, chip preference and volume. We shortlist tags that fit.
- 02
Sample
Receive sample tags of the shortlisted designs to try in your own setup.
- 03
Validate
Test on your items, readers and printers. We adjust chip, size or format if needed.
- 04
Produce & ship
Volume production with 100% inline electrical test, then export shipping.
Frequently asked questions
Can I order the AZ-N213-S05 as a wet inlay or a printed label?
Can smartphones read the AZ-N213-S05?
How do I get samples and a quote for the AZ-N213-S05?
Selection guides
-
NTAG213 vs NTAG215 vs NTAG216: Size the NFC Payload
Compare NTAG213, NTAG215 and NTAG216 by actual NDEF size. Check usable memory, locking and finished-tag performance before requesting NFC label samples.
-
NFC for Brand Protection: Identity Is Not Authentication
Build an NFC brand-protection brief around threats, tag security and a verification service. A copied URL or static UID is not proof of authenticity.
Related designs
Talk to an RFID engineer
Not sure which tag fits your project?
Send the surface, read distance and volume. An engineer replies within 24 hours with a recommendation and a sample plan.
Email us: sales@antenza.com