UHF + NFC AZ-DF-S01
Monza R6-P + NTAG213 Dual-Frequency Tag, AZ-DF-S01
- Chips (UHF + HF)
- Monza R6-P + NTAG213
- Antenna size
- On request
Impinj · Monza R6
Impinj Monza R6-P RFID chip
Retail loss prevention, brand protection and serialization that needs a little user memory
| Chip | Impinj Monza R6-P |
|---|---|
| Vendor | Impinj |
| Frequency | UHF 860–960 MHz |
| Protocol | EPC Gen2v2 (ISO/IEC 18000-63), RAIN RFID |
| Memory | Selectable 128-bit EPC + 32-bit user memory or 96-bit EPC + 64-bit user memory, serialized TID |
| Read sensitivity | up to −22 dBm Vendor datasheet, bare chip; not finished-tag read range |
| Write sensitivity | up to −17 dBm Vendor datasheet, bare chip |
Chip capabilities and selection notes
Access/kill passwords and a short-range privacy mode, plus AutoTune, Integra, Enduro, FastID and TagFocus.
Impinj marks Monza R6-P as not recommended for new designs; ask us about current alternatives.
The chip is one part of the RFID design. Antenna geometry, label layers, tagged material and reader setup all influence the result. Confirm the footprint, data format and mounting condition when requesting samples.
Tag designs using Impinj Monza R6-P
A design may list this chip as its standard IC or as an ordering option. Confirm the exact configuration with your RFQ.
UHF + NFC 
UHF AZ-R6-S01
Monza R6 / R6-P UHF RFID Inlay, AZ-R6-S01
- Chip options
- Monza R6 / Monza R6-P
- Antenna size
- On request
UHF AZ-R6-S02
Monza R6 / R6-P UHF RFID Inlay, AZ-R6-S02
- Chip options
- Monza R6 / Monza R6-P
- Antenna size
- On request
UHF AZ-R6-S03
Monza R6 / R6-P UHF RFID Inlay, AZ-R6-S03
- Chip options
- Monza R6 / Monza R6-P
- Antenna size
- On request
UHF AZ-R6-S04
Monza R6 / R6-P UHF RFID Inlay, AZ-R6-S04
- Chip options
- Monza R6 / Monza R6-P
- Antenna size
- On request
UHF AZ-R6-S05
Monza R6 / R6-P UHF RFID Inlay, AZ-R6-S05
- Chip options
- Monza R6 / Monza R6-P
- Antenna size
- On request
How ordering works
- 01
Specify
Share surface, read distance, chip preference and volume. We shortlist tags that fit.
- 02
Sample
Receive sample tags of the shortlisted designs to try in your own setup.
- 03
Validate
Test on your items, readers and printers. We adjust chip, size or format if needed.
- 04
Produce & ship
Volume production with 100% inline electrical test, then export shipping.
Frequently asked questions
How do I choose a tag with Impinj Monza R6-P?
Match the reader protocol and required memory first, then compare antenna size and mounting material. Test the finished tag on the intended object before a volume order.
Can the datasheet tell me how far the label reads?
Chip specifications describe the integrated circuit. Finished-tag read range depends on the antenna, reader, power and tagged material; use measured sample results for qualification.
Can I request another format or chip option?
Share the desired footprint, format and encoding requirements. We will confirm a suitable chip and antenna combination and arrange the sample configuration before quoting bulk.
Selection guides
-
UCODE, Monza and Higgs: Compare UHF RFID Chips
Compare UHF chip memory, reader features and lifecycle support. Use official datasheets to shortlist chips, then test the complete inlay on your items.
-
RFID Read Range: What Changes the Result in Your Site
RFID read range depends on the complete system. Control power, antenna, surface, orientation and reader settings when comparing labels on real objects.
Talk to an RFID engineer
Not sure which tag fits your project?
Send the surface, read distance and volume. An engineer replies within 24 hours with a recommendation and a sample plan.
Email us: sales@antenza.com