AZ-H10-50X30
Higgs-10 UHF RFID Inlay, 50.26 × 30 mm
A 50.26 × 30 mm UHF RFID inlay on Higgs-10, available as dry inlay, wet inlay or finished label.
Validate samples first. Engineer reply within 24 h.
Check suitability for your application
See the sample validation checklist
| SKU | AZ-H10-50X30 |
|---|---|
| Frequency | UHF 860–960 MHz |
| Protocol | EPC Gen2 (ISO/IEC 18000-63), RAIN RFID |
| Chip | Alien Higgs-10 |
| Memory | Up to 128-bit EPC (96-bit nominal), up to 32-bit user memory with a 96-bit EPC, 48-bit unique TID |
| Chip read sensitivity | −21.5 dBm (vendor reference) Vendor-specified measurement conditions; not finished-tag performance |
| Antenna size | 50.26 × 30 mm |
| Format | Inlay (dry / wet / label) |
| Typical applications | Apparel & footwear |
Design and application notes
Built around the Alien Higgs-10 chip, this inlay uses a 50.26 × 30 mm dipole antenna, a common footprint for hang tags, retail labels and general item tagging, and is read by EPC Gen2 (ISO/IEC 18000-63) readers across the 860–960 MHz band.
Alien Higgs-10 provides up to 128-bit EPC (96-bit nominal), up to 32-bit user memory with a 96-bit EPC, 48-bit unique TID. Alien lists read sensitivity of −21.5 dBm and write sensitivity of −19 dBm as vendor reference values (Vendor-specified measurement conditions; not finished-tag performance). Validate the complete tag with samples on the intended item and reader setup. Datasheet highlights: Sentinel Memory error correction, 200,000 write cycles and enhanced backscatter.
We do not publish a read range for this design. Range depends on the reader, antenna, power and tagged material, so ask us for test data or samples for your setup.
Buyers typically use this UHF RFID inlay for apparel hang tags, care labels and price tickets.
The same chip and antenna are available as dry inlay, wet inlay or label; printing, EPC encoding and custom label sizes are quoted on request. Start with samples, then move to volume once the tag passes your tests; volume orders are produced with our ISO 9001-certified production partner and 100% electrically tested inline.
Specification basis and validation
Vendor documents describe the chip, not finished-tag read range.
Confirm catalog dimensions against the final tag construction. Reference read ranges require sample testing on your item with your reader setup.
Order in the format you need
Confirm the construction and encoding during sampling, then quote the configuration you validated.
Dry inlay
Chip and antenna on a PET carrier without adhesive, for your own converting, hang tags or lamination.
Wet inlay
The same inlay with pressure-sensitive adhesive on a liner, applied like a sticker.
Label
Paper or synthetic face stock over the inlay, blank or printed, ready for RFID printers.
Custom
Other label sizes, face stocks, adhesives, printing, encoding and roll formats on request.
What should the sample pass before a bulk order?
Agree the actual use conditions and pass criteria before selecting samples. The catalogue supports shortlisting; confirm finished-tag performance and delivery configuration in writing and through sample validation.
-
Fix the actual reader and item conditions
Record the deployment region, reader, antenna, power, item material and tag position. Test realistic density, orientation and movement; define which items must be read and which must remain excluded.
-
Check RF, encoding and conversion separately
Record missed and unintended reads by unique identity. Read back the EPC against source data and printed IDs. Test the final roll on the specified printing and encoding equipment, and assess adhesion and mounting separately.
-
Record the approved construction and delivery configuration
Record the SKU, sample revision, lot, device settings, results and approver. Confirm final dimensions, materials, printing, encoding, quantity and delivery requirements, and agree which configuration changes require another trial.
Use the test record to save actual conditions and results. English and Chinese worksheets are provided; the agreed reviewer determines acceptance.
Download test recordHow ordering works
- 01
Specify
Share surface, read distance, chip preference and volume. We shortlist tags that fit.
- 02
Sample
Receive sample tags of the shortlisted designs to try in your own setup.
- 03
Validate
Test on your items, readers and printers. We adjust chip, size or format if needed.
- 04
Produce & ship
Volume production with 100% inline electrical test, then export shipping.
Frequently asked questions
Can I order the AZ-H10-50X30 as a wet inlay or a printed label?
What read range will I get with the AZ-H10-50X30?
How do I get samples and a quote for the AZ-H10-50X30?
Selection guides
-
RFID Hang Tags for Apparel: Placement, Encoding and Approval
Specify apparel RFID hang tags by attachment, artwork, inlay position and serialized identity. Test folded, packed and displayed garments before approval.
-
Dry Inlay, Wet Inlay or RFID Label: What Are You Buying?
Understand dry inlays, adhesive wet inlays and converted labels. Specify the antenna, finished dimensions and roll format so your RFID order is usable.
Related designs
Talk to an RFID engineer
Not sure which tag fits your project?
Send the surface, read distance and volume. An engineer replies within 24 hours with a recommendation and a sample plan.
Email us: sales@antenza.com