ICODE SLIX HF RFID Tag, AZ-SLX-S02: spec drawing (HF / NFC, NXP ICODE SLIX)

AZ-SLX-S02

ICODE SLIX HF RFID Tag, AZ-SLX-S02

ICODE SLIX HF RFID tag for ISO/IEC 15693 systems such as library and pharmaceutical readers.

Full dimensions for this design are available on request. Ask for the specification and samples before ordering. Request specifications

Validate samples first. Engineer reply within 24 h.

See the sample validation checklist

Specifications
SKU AZ-SLX-S02
Frequency HF 13.56 MHz (NFC)
Protocol ISO/IEC 15693, NFC Forum Type 5
Chip NXP ICODE SLIX
Memory 896-bit user memory, 64-bit UID
Antenna size On request
Format Inlay (dry / wet / label)
Typical applications Pharma & healthcare, Libraries & archives

Design and application notes

ICODE SLIX HF RFID Tag, AZ-SLX-S02 is a 13.56 MHz HF RFID tag with the NXP ICODE SLIX chip on an HF coil antenna, following ISO/IEC 15693, NFC Forum Type 5. Library, pharmaceutical or document systems need readers and applications that support ISO/IEC 15693. For NDEF, also check tag-type and record handling; for raw HF memory, check field and address mapping. Read back the complete content with the intended equipment.

NXP ICODE SLIX provides 896-bit user memory, 64-bit UID. It follows ISO/IEC 15693, NFC Forum Type 5. Datasheet highlights: vicinity HF operation (up to 1.5 m with gate antennas, depending on antenna geometry), password-protected EAS and AFI, true anticollision.

Full dimensions for this design are available on request. Reading performance depends on the reader antenna, tag antenna size and surrounding material. Read back the complete sample content on the actual item with the intended equipment to confirm that the configuration meets the workflow.

It is typically used for pharmaceutical boxes, vials and specimen labels and library books and media. The application pages below give chip and size recommendations for each industry.

Order it as a dry inlay for your own converting, a wet inlay with adhesive and liner, or a finished label, blank or printed, with data such as an NDEF URL encoded and locked. We ship samples first so you can validate on your own items and readers, then quote the format you tested.

Specification basis and validation

Vendor documents describe the chip, not finished-tag read range.

Confirm catalog dimensions against the final tag construction. Reference read ranges require sample testing on your item with your reader setup.

Order in the format you need

Confirm the construction and encoding during sampling, then quote the configuration you validated.

  • Dry inlay

    Chip and antenna on a PET carrier without adhesive, for your own converting, hang tags or lamination.

  • Wet inlay

    The same inlay with pressure-sensitive adhesive on a liner, applied like a NFC sticker.

  • Label

    Paper or synthetic face stock over the inlay, blank or printed, with data encoded and locked.

  • Custom

    Other label sizes, face stocks, adhesives, printing, encoding and roll formats on request.

What should the sample pass before a bulk order?

Agree the actual use conditions and pass criteria before selecting samples. The catalogue supports shortlisting; confirm finished-tag performance and delivery configuration in writing and through sample validation.

  1. Validate the ISO/IEC 15693 devices and application

    On real items, read back the agreed fields using the specified HF reader and application. If phone reading is required, separately check the phone, OS, application and data format, and record the expected result.

  2. Check complete data and mounting

    For raw HF data, verify the agreed addresses and fields. For NDEF, check usable capacity and the complete message. Reconcile unique and printed IDs, record adhesion separately, and approve access or locks after sample validation.

  3. Record the approved construction and delivery configuration

    Record the SKU, sample revision, lot, device settings, results and approver. Confirm final dimensions, materials, printing, encoding, quantity and delivery requirements, and agree which configuration changes require another trial.

Use the test record to save actual conditions and results. English and Chinese worksheets are provided; the agreed reviewer determines acceptance.

Download test record

How ordering works

  1. 01

    Specify

    Share surface, read distance, chip preference and volume. We shortlist tags that fit.

  2. 02

    Sample

    Receive sample tags of the shortlisted designs to try in your own setup.

  3. 03

    Validate

    Test on your items, readers and printers. We adjust chip, size or format if needed.

  4. 04

    Produce & ship

    Volume production with 100% inline electrical test, then export shipping.

Frequently asked questions

Can I order the AZ-SLX-S02 as a wet inlay or a printed label?

Yes. The same chip and antenna are available as a dry inlay (no adhesive), a wet inlay (adhesive on a liner) or a label with paper or synthetic face stock, blank or printed. Data encoding and locking and custom label sizes are quoted on request; see custom tags.

What reads the AZ-SLX-S02?

NXP ICODE SLIX follows ISO/IEC 15693, NFC Forum Type 5. Choose a reader or phone and application that support ISO/IEC 15693. For NDEF, also check the tag type and complete-record handling; for raw HF memory, check field and address mapping. Read back the complete sample content with the intended device and application and verify the workflow.

How do I get samples and a quote for the AZ-SLX-S02?

Use the quote button on this page or request samples. Tell us the item, surface, read distance and annual volume; an engineer replies within 24 hours with a recommendation and a sample plan.

Talk to an RFID engineer

Not sure which tag fits your project?

Send the surface, read distance and volume. An engineer replies within 24 hours with a recommendation and a sample plan.

Email us: sales@antenza.com

Quick quote

ICODE SLIX HF RFID Tag, AZ-SLX-S02

AZ-SLX-S02

Tell us the quantity and where the tag goes. We reply within 24 hours.

For a quote, share the item, target phone or NFC reader, data to write, quantity, and printing needs. Add the adhesive or mounting method if known.

An engineer replies within 24 hours.

By sending this form you agree to our privacy policy. We use your details to answer and follow up on this inquiry.

Cloudflare Turnstile checks submissions to prevent spam.

Email us Get a quote