Qstar-7X UHF RFID Inlay, 44 × 44 mm: spec drawing (UHF, Quanray Qstar-7X, 44 × 44 mm)

AZ-QS7-44X44

Qstar-7X UHF RFID Inlay, 44 × 44 mm

Qstar-7X UHF inlay with a 44 × 44 mm square antenna, supplied dry, wet or as a finished label.

Validate samples first. Engineer reply within 24 h.

Check suitability for your application

See the sample validation checklist

Specifications
SKU AZ-QS7-44X44
Frequency UHF 860–960 MHz
Protocol UHF RFID (specifications on request)
Chip Quanray Qstar-7X
Chip parameters Specifications on request
Antenna size 44 × 44 mm
Format Inlay (dry / wet / label)
Read range 6–10 m (reference) depends on reader, antenna, power and the tagged material

Design and application notes

Built around the Quanray Qstar-7X chip, this inlay uses a 44 × 44 mm square antenna, a square footprint that fits small items with limited label space, and is read by UHF readers across the 860–960 MHz band.

Quanray does not publish a public datasheet for the Qstar-7X, so we do not list chip parameters here. We share the specifications we hold on request and recommend testing samples before a volume order.

Reference read range: 6–10 m (reference). Real-world range depends on the reader, antenna, power and the material the tag is attached to, so treat it as a comparison value and confirm it with samples on your own items.

Whether it fits depends on your item and reader setup; describe the use case and we will confirm if this design is a good match.

The same chip and antenna are available as dry inlay, wet inlay or label; printing, EPC encoding and custom label sizes are quoted on request. Start with samples, then move to volume once the tag passes your tests; volume orders are produced with our ISO 9001-certified production partner and 100% electrically tested inline.

Specification basis and validation

No verified public chip document is listed for this design. Request chip specifications before selecting samples.

Confirm catalog dimensions against the final tag construction. Reference read ranges require sample testing on your item with your reader setup.

Order in the format you need

Confirm the construction and encoding during sampling, then quote the configuration you validated.

  • Dry inlay

    Chip and antenna on a PET carrier without adhesive, for your own converting, hang tags or lamination.

  • Wet inlay

    The same inlay with pressure-sensitive adhesive on a liner, applied like a sticker.

  • Label

    Paper or synthetic face stock over the inlay, blank or printed, ready for RFID printers.

  • Custom

    Other label sizes, face stocks, adhesives, printing, encoding and roll formats on request.

What should the sample pass before a bulk order?

Agree the actual use conditions and pass criteria before selecting samples. The catalogue supports shortlisting; confirm finished-tag performance and delivery configuration in writing and through sample validation.

  1. Fix the actual reader and item conditions

    Record the deployment region, reader, antenna, power, item material and tag position. Test realistic density, orientation and movement; define which items must be read and which must remain excluded.

  2. Check RF, encoding and conversion separately

    Record missed and unintended reads by unique identity. Read back the EPC against source data and printed IDs. Test the final roll on the specified printing and encoding equipment, and assess adhesion and mounting separately.

  3. Record the approved construction and delivery configuration

    Record the SKU, sample revision, lot, device settings, results and approver. Confirm final dimensions, materials, printing, encoding, quantity and delivery requirements, and agree which configuration changes require another trial.

Use the test record to save actual conditions and results. English and Chinese worksheets are provided; the agreed reviewer determines acceptance.

Download test record

How ordering works

  1. 01

    Specify

    Share surface, read distance, chip preference and volume. We shortlist tags that fit.

  2. 02

    Sample

    Receive sample tags of the shortlisted designs to try in your own setup.

  3. 03

    Validate

    Test on your items, readers and printers. We adjust chip, size or format if needed.

  4. 04

    Produce & ship

    Volume production with 100% inline electrical test, then export shipping.

Frequently asked questions

Can I order the AZ-QS7-44X44 as a wet inlay or a printed label?

Yes. The same chip and antenna are available as a dry inlay (no adhesive), a wet inlay (adhesive on a liner) or a label with paper or synthetic face stock, blank or printed. EPC encoding and custom label sizes are quoted on request; see custom tags.

What read range will I get with the AZ-QS7-44X44?

Our reference value is 6–10 m (reference). Real-world range depends on the reader, antenna, power and the tagged material, so we recommend testing samples in your setup.

How do I get samples and a quote for the AZ-QS7-44X44?

Use the quote button on this page or request samples. Tell us the item, surface, read distance and annual volume; an engineer replies within 24 hours with a recommendation and a sample plan.

Talk to an RFID engineer

Not sure which tag fits your project?

Send the surface, read distance and volume. An engineer replies within 24 hours with a recommendation and a sample plan.

Email us: sales@antenza.com

Quick quote

Qstar-7X UHF RFID Inlay, 44 × 44 mm

AZ-QS7-44X44

Tell us the quantity and where the tag goes. We reply within 24 hours.

For a quote, share the tagged item, surface material, required read distance, reader model, quantity, and printing or encoding needs. Add your roll format if known.

An engineer replies within 24 hours.

By sending this form you agree to our privacy policy. We use your details to answer and follow up on this inquiry.

Cloudflare Turnstile checks submissions to prevent spam.

Email us Get a quote