AZ-QS7-46X28
Qstar-7X UHF RFID Inlay, 46 × 28 mm
Qstar-7X UHF inlay with a 46 × 28 mm dipole antenna, supplied dry, wet or as a finished label.
Validate samples first. Engineer reply within 24 h.
Check suitability for your application
See the sample validation checklist
| SKU | AZ-QS7-46X28 |
|---|---|
| Frequency | UHF 860–960 MHz |
| Protocol | UHF RFID (specifications on request) |
| Chip | Quanray Qstar-7X |
| Chip parameters | Specifications on request |
| Antenna size | 46 × 28 mm |
| Format | Inlay (dry / wet / label) |
| Read range | 6–10 m (reference) depends on reader, antenna, power and the tagged material |
Design and application notes
Built around the Quanray Qstar-7X chip, this inlay uses a 46 × 28 mm dipole antenna, a common footprint for hang tags, retail labels and general item tagging, and is read by UHF readers across the 860–960 MHz band.
Quanray does not publish a public datasheet for the Qstar-7X, so we do not list chip parameters here. We share the specifications we hold on request and recommend testing samples before a volume order.
Reference read range: 6–10 m (reference). Real-world range depends on the reader, antenna, power and the material the tag is attached to, so treat it as a comparison value and confirm it with samples on your own items.
Whether it fits depends on your item and reader setup; describe the use case and we will confirm if this design is a good match.
The same chip and antenna are available as dry inlay, wet inlay or label; printing, EPC encoding and custom label sizes are quoted on request. Start with samples, then move to volume once the tag passes your tests; volume orders are produced with our ISO 9001-certified production partner and 100% electrically tested inline.
Specification basis and validation
No verified public chip document is listed for this design. Request chip specifications before selecting samples.
Confirm catalog dimensions against the final tag construction. Reference read ranges require sample testing on your item with your reader setup.
Order in the format you need
Confirm the construction and encoding during sampling, then quote the configuration you validated.
Dry inlay
Chip and antenna on a PET carrier without adhesive, for your own converting, hang tags or lamination.
Wet inlay
The same inlay with pressure-sensitive adhesive on a liner, applied like a sticker.
Label
Paper or synthetic face stock over the inlay, blank or printed, ready for RFID printers.
Custom
Other label sizes, face stocks, adhesives, printing, encoding and roll formats on request.
What should the sample pass before a bulk order?
Agree the actual use conditions and pass criteria before selecting samples. The catalogue supports shortlisting; confirm finished-tag performance and delivery configuration in writing and through sample validation.
-
Fix the actual reader and item conditions
Record the deployment region, reader, antenna, power, item material and tag position. Test realistic density, orientation and movement; define which items must be read and which must remain excluded.
-
Check RF, encoding and conversion separately
Record missed and unintended reads by unique identity. Read back the EPC against source data and printed IDs. Test the final roll on the specified printing and encoding equipment, and assess adhesion and mounting separately.
-
Record the approved construction and delivery configuration
Record the SKU, sample revision, lot, device settings, results and approver. Confirm final dimensions, materials, printing, encoding, quantity and delivery requirements, and agree which configuration changes require another trial.
Use the test record to save actual conditions and results. English and Chinese worksheets are provided; the agreed reviewer determines acceptance.
Download test recordHow ordering works
- 01
Specify
Share surface, read distance, chip preference and volume. We shortlist tags that fit.
- 02
Sample
Receive sample tags of the shortlisted designs to try in your own setup.
- 03
Validate
Test on your items, readers and printers. We adjust chip, size or format if needed.
- 04
Produce & ship
Volume production with 100% inline electrical test, then export shipping.
Frequently asked questions
Can I order the AZ-QS7-46X28 as a wet inlay or a printed label?
What read range will I get with the AZ-QS7-46X28?
How do I get samples and a quote for the AZ-QS7-46X28?
Selection guides
-
Dry Inlay, Wet Inlay or RFID Label: What Are You Buying?
Understand dry inlays, adhesive wet inlays and converted labels. Specify the antenna, finished dimensions and roll format so your RFID order is usable.
-
UCODE, Monza and Higgs: Compare UHF RFID Chips
Compare UHF chip memory, reader features and lifecycle support. Use official datasheets to shortlist chips, then test the complete inlay on your items.
Related designs
AZ-QS7-95X8
Qstar-7X UHF RFID Inlay, 94.8 × 8.15 mm
- Chip
- Quanray Qstar-7X
- Antenna size
- 94.8 × 8.15 mm
Talk to an RFID engineer
Not sure which tag fits your project?
Send the surface, read distance and volume. An engineer replies within 24 hours with a recommendation and a sample plan.
Email us: sales@antenza.com