Impinj · M700
Impinj M730 RFID chip
Retail inventory, self-checkout loss prevention and dense-tag logistics
| Chip | Impinj M730 |
|---|---|
| Vendor | Impinj |
| Frequency | UHF 860–960 MHz |
| Protocol | EPC Gen2v2 (ISO/IEC 18000-63), RAIN RFID |
| Memory | 128-bit EPC, 96-bit TID with a 48-bit serial number, no user memory |
| Read sensitivity | −24 dBm (vendor reference) Vendor-specified measurement conditions; not finished-tag performance |
| Write sensitivity | −21 dBm (vendor reference) Vendor-specified measurement conditions; not finished-tag performance |
Chip capabilities and selection notes
Enhanced AutoTune, Integra memory diagnostics, Protected Mode, Enduro bonding, FastID and TagFocus.
The chip is one part of the RFID design. Antenna geometry, label layers, tagged material and reader setup all influence the result. Confirm the footprint, data format and mounting condition when requesting samples.
Four checks before approving a chip and tag
-
Match the protocol and equipment
Confirm the protocol supported by the actual reader, phone and application, plus the deployment region and read workflow.
-
Check memory for the actual format
Provide the complete encoded content and check usable memory and format overhead. For NDEF, validate the message against the actual declared capacity.
-
Validate the antenna, item and encoding
Apply candidate tags to real items, test with the intended equipment settings, and read back the content and identifier mapping.
-
Confirm supply and sample acceptance
Check chip lifecycle and current supply terms. Agree sample configuration, acceptance criteria and quotation in writing before deciding on volume.
Tag designs using Impinj M730
A design may list this chip as its standard IC or as an ordering option. Confirm the exact configuration with your RFQ.
How ordering works
- 01
Specify
Share surface, read distance, chip preference and volume. We shortlist tags that fit.
- 02
Sample
Receive sample tags of the shortlisted designs to try in your own setup.
- 03
Validate
Test on your items, readers and printers. We adjust chip, size or format if needed.
- 04
Produce & ship
Volume production with 100% inline electrical test, then export shipping.
Frequently asked questions
How do I choose a tag with Impinj M730?
Can the datasheet tell me how far the label reads?
Can I request another format or chip option?
Selection guides
-
UCODE, Monza and Higgs: Compare UHF RFID Chips
Compare UHF chip memory, reader features and lifecycle support. Use official datasheets to shortlist chips, then test the complete inlay on your items.
-
RFID Read Range: What Changes the Result in Your Site
RFID read range depends on the complete system. Control power, antenna, surface, orientation and reader settings when comparing labels on real objects.
Talk to an RFID engineer
Not sure which tag fits your project?
Send the surface, read distance and volume. An engineer replies within 24 hours with a recommendation and a sample plan.
Email us: sales@antenza.com