Monza 4 UHF RFID Inlay, AZ-M4-S02

Monza 4 UHF RFID Inlay, AZ-M4-S02 is a passive UHF RFID inlay design with a choice of Impinj Monza 4D, Impinj Monza 4E or Impinj Monza 4QT chips on a dipole antenna for the 860–960 MHz band. Its antenna dimensions are shared on request: tell us the item and the label position, and we will confirm whether it fits and send samples.

The same antenna design is offered with Impinj Monza 4D, Impinj Monza 4E or Impinj Monza 4QT; each tag carries one of them. The options differ mainly in memory: Impinj Monza 4D has 128-bit EPC, 32-bit user memory, 96-bit TID with a 48-bit serial number; Impinj Monza 4E has up to 496-bit EPC, 128-bit user memory, 96-bit TID with a 48-bit serial number; Impinj Monza 4QT has 128-bit EPC, 512-bit user memory, 96-bit TID with a 48-bit serial number. Datasheet read sensitivity (bare chip): up to −19.5 dBm for Monza 4D, up to −19.5 dBm for Monza 4E, up to −19.5 dBm for Monza 4QT. Tell us which chip your system expects, or ask us to recommend one for your application.

We do not publish a read range for this design. Range depends on the reader, antenna, power and tagged material, so ask us for test data or samples for your setup.

It is typically used for carton, tote and pallet labels. The application pages below give chip and size recommendations for each industry.

Order it as a dry inlay for your own converting, a wet inlay with adhesive and liner, or a finished label, blank or printed and EPC-encoded. We ship samples first so you can validate on your own items and readers, then quote the format you tested.