AZ-M4-S02
Monza 4 UHF RFID Inlay, AZ-M4-S02
- Chip options
- Monza 4D / Monza 4E / Monza 4QT
- Antenna size
- On request
AZ-M4-S06
Monza 4D / Monza 4E / Monza 4QT UHF RFID inlay design; antenna dimensions and test data are available on request.
Full dimensions for this design are available on request. Ask for the specification and samples before ordering. Request specifications
Validate samples first. Engineer reply within 24 h.
See the sample validation checklist
| SKU | AZ-M4-S06 |
|---|---|
| Frequency | UHF 860–960 MHz |
| Protocol | EPC Gen2 (ISO/IEC 18000-63), RAIN RFID; EPC Gen2v2 (ISO/IEC 18000-63), RAIN RFID |
| Chip options | Impinj Monza 4D, Impinj Monza 4E, Impinj Monza 4QT |
| Antenna size | On request |
| Format | Inlay (dry / wet / label) |
| Typical applications | Logistics & supply chain |
Monza 4 UHF RFID Inlay, AZ-M4-S06 is a passive UHF RFID inlay design with a choice of Impinj Monza 4D, Impinj Monza 4E or Impinj Monza 4QT chips on a dipole antenna for the 860–960 MHz band. Its antenna dimensions are shared on request: tell us the item and the label position, and we will confirm whether it fits and send samples.
The same antenna design is offered with Impinj Monza 4D, Impinj Monza 4E or Impinj Monza 4QT; each tag carries one of them. The options differ mainly in memory: Impinj Monza 4D has 128-bit EPC, 32-bit user memory, 96-bit TID with a 48-bit serial number; Impinj Monza 4E has up to 496-bit EPC, 128-bit user memory, 96-bit TID with a 48-bit serial number; Impinj Monza 4QT has 128-bit EPC, 512-bit user memory, 96-bit TID with a 48-bit serial number. Vendor read sensitivity references: Monza 4D −19.5 dBm (Vendor-specified measurement conditions; not finished-tag performance); Monza 4E −19.5 dBm (Vendor-specified measurement conditions; not finished-tag performance); Monza 4QT −19.5 dBm (Vendor-specified measurement conditions; not finished-tag performance). Validate the complete tag with samples. Tell us which chip your system expects, or ask us to recommend one for your application.
We do not publish a read range for this design. Range depends on the reader, antenna, power and tagged material, so ask us for test data or samples for your setup.
It is typically used for carton, tote and pallet labels. The application pages below give chip and size recommendations for each industry.
Order it as a dry inlay for your own converting, a wet inlay with adhesive and liner, or a finished label, blank or printed and EPC-encoded. We ship samples first so you can validate on your own items and readers, then quote the format you tested.
Vendor documents describe the chip, not finished-tag read range.
Confirm catalog dimensions against the final tag construction. Reference read ranges require sample testing on your item with your reader setup.
Confirm the construction and encoding during sampling, then quote the configuration you validated.
Chip and antenna on a PET carrier without adhesive, for your own converting, hang tags or lamination.
The same inlay with pressure-sensitive adhesive on a liner, applied like a sticker.
Paper or synthetic face stock over the inlay, blank or printed, ready for RFID printers.
Other label sizes, face stocks, adhesives, printing, encoding and roll formats on request.
Agree the actual use conditions and pass criteria before selecting samples. The catalogue supports shortlisting; confirm finished-tag performance and delivery configuration in writing and through sample validation.
Record the deployment region, reader, antenna, power, item material and tag position. Test realistic density, orientation and movement; define which items must be read and which must remain excluded.
Record missed and unintended reads by unique identity. Read back the EPC against source data and printed IDs. Test the final roll on the specified printing and encoding equipment, and assess adhesion and mounting separately.
Record the SKU, sample revision, lot, device settings, results and approver. Confirm final dimensions, materials, printing, encoding, quantity and delivery requirements, and agree which configuration changes require another trial.
Use the test record to save actual conditions and results. English and Chinese worksheets are provided; the agreed reviewer determines acceptance.
Download test recordShare surface, read distance, chip preference and volume. We shortlist tags that fit.
Receive sample tags of the shortlisted designs to try in your own setup.
Test on your items, readers and printers. We adjust chip, size or format if needed.
Volume production with 100% inline electrical test, then export shipping.
Understand dry inlays, adhesive wet inlays and converted labels. Specify the antenna, finished dimensions and roll format so your RFID order is usable.
Compare UHF chip memory, reader features and lifecycle support. Use official datasheets to shortlist chips, then test the complete inlay on your items.
AZ-M4-S02
AZ-M4-S03
AZ-M4-S04
AZ-M4-S08
Talk to an RFID engineer
Send the surface, read distance and volume. An engineer replies within 24 hours with a recommendation and a sample plan.
Email us: sales@antenza.com