UHF AZ-M4-S01
Monza 4 UHF RFID Inlay, AZ-M4-S01
- Chip options
- Monza 4D / Monza 4E / Monza 4QT
- Antenna size
- On request
Impinj · Monza 4
Impinj Monza 4D RFID chip
General supply-chain and asset tracking, orientation-insensitive tags
| Chip | Impinj Monza 4D |
|---|---|
| Vendor | Impinj |
| Frequency | UHF 860–960 MHz |
| Protocol | EPC Gen2 (ISO/IEC 18000-63), RAIN RFID |
| Memory | 128-bit EPC, 32-bit user memory, 96-bit TID with a 48-bit serial number |
| Read sensitivity | up to −19.5 dBm Vendor datasheet, bare chip; not finished-tag read range |
Chip capabilities and selection notes
True3D: two independent antenna ports for orientation-insensitive (dual-dipole) tag designs.
The chip is one part of the RFID design. Antenna geometry, label layers, tagged material and reader setup all influence the result. Confirm the footprint, data format and mounting condition when requesting samples.
Tag designs using Impinj Monza 4D
A design may list this chip as its standard IC or as an ordering option. Confirm the exact configuration with your RFQ.
UHF 
UHF AZ-M4-S02
Monza 4 UHF RFID Inlay, AZ-M4-S02
- Chip options
- Monza 4D / Monza 4E / Monza 4QT
- Antenna size
- On request
UHF AZ-M4-S03
Monza 4 UHF RFID Inlay, AZ-M4-S03
- Chip options
- Monza 4D / Monza 4E / Monza 4QT
- Antenna size
- On request
UHF AZ-M4-S04
Monza 4 UHF RFID Inlay, AZ-M4-S04
- Chip options
- Monza 4D / Monza 4E / Monza 4QT
- Antenna size
- On request
UHF AZ-M4-S05
Monza 4 UHF RFID Inlay, AZ-M4-S05
- Chip options
- Monza 4D / Monza 4E / Monza 4QT
- Antenna size
- On request
UHF AZ-M4-S06
Monza 4 UHF RFID Inlay, AZ-M4-S06
- Chip options
- Monza 4D / Monza 4E / Monza 4QT
- Antenna size
- On request
UHF AZ-M4-S07
Monza 4 UHF RFID Inlay, AZ-M4-S07
- Chip options
- Monza 4D / Monza 4E / Monza 4QT
- Antenna size
- On request
UHF AZ-M4-S08
Monza 4 Dual-Dipole UHF RFID Inlay, AZ-M4-S08
- Chip options
- Monza 4D / Monza 4E / Monza 4QT
- Antenna size
- On request
UHF AZ-M4-S09
Monza 4 Dual-Dipole UHF RFID Inlay, AZ-M4-S09
- Chip options
- Monza 4D / Monza 4E / Monza 4QT
- Antenna size
- On request
UHF AZ-M4-S10
Monza 4 Dual-Dipole UHF RFID Inlay, AZ-M4-S10
- Chip options
- Monza 4D / Monza 4E / Monza 4QT
- Antenna size
- On request
How ordering works
- 01
Specify
Share surface, read distance, chip preference and volume. We shortlist tags that fit.
- 02
Sample
Receive sample tags of the shortlisted designs to try in your own setup.
- 03
Validate
Test on your items, readers and printers. We adjust chip, size or format if needed.
- 04
Produce & ship
Volume production with 100% inline electrical test, then export shipping.
Frequently asked questions
How do I choose a tag with Impinj Monza 4D?
Match the reader protocol and required memory first, then compare antenna size and mounting material. Test the finished tag on the intended object before a volume order.
Can the datasheet tell me how far the label reads?
Chip specifications describe the integrated circuit. Finished-tag read range depends on the antenna, reader, power and tagged material; use measured sample results for qualification.
Can I request another format or chip option?
Share the desired footprint, format and encoding requirements. We will confirm a suitable chip and antenna combination and arrange the sample configuration before quoting bulk.
Selection guides
-
UCODE, Monza and Higgs: Compare UHF RFID Chips
Compare UHF chip memory, reader features and lifecycle support. Use official datasheets to shortlist chips, then test the complete inlay on your items.
-
RFID Read Range: What Changes the Result in Your Site
RFID read range depends on the complete system. Control power, antenna, surface, orientation and reader settings when comparing labels on real objects.
Talk to an RFID engineer
Not sure which tag fits your project?
Send the surface, read distance and volume. An engineer replies within 24 hours with a recommendation and a sample plan.
Email us: sales@antenza.com