Monza 4 UHF RFID Inlay, AZ-M4-S05: spec drawing (UHF, Monza 4D / Monza 4E / Monza 4QT)

AZ-M4-S05

Monza 4 UHF RFID Inlay, AZ-M4-S05

Monza 4D / Monza 4E / Monza 4QT UHF RFID inlay design; antenna dimensions and test data are available on request.

Full dimensions for this design are available on request. Ask for the specification and samples before ordering. Request specifications

Validate samples first. Engineer reply within 24 h.

See the sample validation checklist

Specifications
SKU AZ-M4-S05
Frequency UHF 860–960 MHz
Protocol EPC Gen2 (ISO/IEC 18000-63), RAIN RFID; EPC Gen2v2 (ISO/IEC 18000-63), RAIN RFID
Chip options Impinj Monza 4D, Impinj Monza 4E, Impinj Monza 4QT
Antenna size On request
Format Inlay (dry / wet / label)
Typical applications Libraries & archives

Design and application notes

Monza 4 UHF RFID Inlay, AZ-M4-S05 is a passive UHF RFID inlay design with a choice of Impinj Monza 4D, Impinj Monza 4E or Impinj Monza 4QT chips on a dipole antenna for the 860–960 MHz band. Its antenna dimensions are shared on request: tell us the item and the label position, and we will confirm whether it fits and send samples.

The same antenna design is offered with Impinj Monza 4D, Impinj Monza 4E or Impinj Monza 4QT; each tag carries one of them. The options differ mainly in memory: Impinj Monza 4D has 128-bit EPC, 32-bit user memory, 96-bit TID with a 48-bit serial number; Impinj Monza 4E has up to 496-bit EPC, 128-bit user memory, 96-bit TID with a 48-bit serial number; Impinj Monza 4QT has 128-bit EPC, 512-bit user memory, 96-bit TID with a 48-bit serial number. Vendor read sensitivity references: Monza 4D −19.5 dBm (Vendor-specified measurement conditions; not finished-tag performance); Monza 4E −19.5 dBm (Vendor-specified measurement conditions; not finished-tag performance); Monza 4QT −19.5 dBm (Vendor-specified measurement conditions; not finished-tag performance). Validate the complete tag with samples. Tell us which chip your system expects, or ask us to recommend one for your application.

We do not publish a read range for this design. Range depends on the reader, antenna, power and tagged material, so ask us for test data or samples for your setup.

Buyers typically use this UHF RFID inlay for library books and media.

The same chip and antenna are available as dry inlay, wet inlay or label; printing, EPC encoding and custom label sizes are quoted on request. Start with samples, then move to volume once the tag passes your tests; volume orders are produced with our ISO 9001-certified production partner and 100% electrically tested inline.

Specification basis and validation

Vendor documents describe the chip, not finished-tag read range.

Confirm catalog dimensions against the final tag construction. Reference read ranges require sample testing on your item with your reader setup.

Order in the format you need

Confirm the construction and encoding during sampling, then quote the configuration you validated.

  • Dry inlay

    Chip and antenna on a PET carrier without adhesive, for your own converting, hang tags or lamination.

  • Wet inlay

    The same inlay with pressure-sensitive adhesive on a liner, applied like a sticker.

  • Label

    Paper or synthetic face stock over the inlay, blank or printed, ready for RFID printers.

  • Custom

    Other label sizes, face stocks, adhesives, printing, encoding and roll formats on request.

What should the sample pass before a bulk order?

Agree the actual use conditions and pass criteria before selecting samples. The catalogue supports shortlisting; confirm finished-tag performance and delivery configuration in writing and through sample validation.

  1. Fix the actual reader and item conditions

    Record the deployment region, reader, antenna, power, item material and tag position. Test realistic density, orientation and movement; define which items must be read and which must remain excluded.

  2. Check RF, encoding and conversion separately

    Record missed and unintended reads by unique identity. Read back the EPC against source data and printed IDs. Test the final roll on the specified printing and encoding equipment, and assess adhesion and mounting separately.

  3. Record the approved construction and delivery configuration

    Record the SKU, sample revision, lot, device settings, results and approver. Confirm final dimensions, materials, printing, encoding, quantity and delivery requirements, and agree which configuration changes require another trial.

Use the test record to save actual conditions and results. English and Chinese worksheets are provided; the agreed reviewer determines acceptance.

Download test record

How ordering works

  1. 01

    Specify

    Share surface, read distance, chip preference and volume. We shortlist tags that fit.

  2. 02

    Sample

    Receive sample tags of the shortlisted designs to try in your own setup.

  3. 03

    Validate

    Test on your items, readers and printers. We adjust chip, size or format if needed.

  4. 04

    Produce & ship

    Volume production with 100% inline electrical test, then export shipping.

Frequently asked questions

Can I order the AZ-M4-S05 as a wet inlay or a printed label?

Yes. The same chip and antenna are available as a dry inlay (no adhesive), a wet inlay (adhesive on a liner) or a label with paper or synthetic face stock, blank or printed. EPC encoding and custom label sizes are quoted on request; see custom tags.

What read range will I get with the AZ-M4-S05?

We do not publish a read range for this design. Real-world range depends on the reader, antenna, power and the tagged material, so we recommend testing samples in your setup.

How do I get samples and a quote for the AZ-M4-S05?

Use the quote button on this page or request samples. Tell us the item, surface, read distance and annual volume; an engineer replies within 24 hours with a recommendation and a sample plan.

Talk to an RFID engineer

Not sure which tag fits your project?

Send the surface, read distance and volume. An engineer replies within 24 hours with a recommendation and a sample plan.

Email us: sales@antenza.com

Quick quote

Monza 4 UHF RFID Inlay, AZ-M4-S05

AZ-M4-S05

Tell us the quantity and where the tag goes. We reply within 24 hours.

For a quote, share the tagged item, surface material, required read distance, reader model, quantity, and printing or encoding needs. Add your roll format if known.

An engineer replies within 24 hours.

By sending this form you agree to our privacy policy. We use your details to answer and follow up on this inquiry.

Cloudflare Turnstile checks submissions to prevent spam.

Email us Get a quote