AZ-M4QT-S01
Monza 4QT UHF RFID Inlay, AZ-M4QT-S01
Monza 4QT UHF RFID inlay design; antenna dimensions and test data are available on request.
Full dimensions for this design are available on request. Ask for the specification and samples before ordering. Request specifications
Validate samples first. Engineer reply within 24 h.
See the sample validation checklist
| SKU | AZ-M4QT-S01 |
|---|---|
| Frequency | UHF 860–960 MHz |
| Protocol | EPC Gen2v2 (ISO/IEC 18000-63), RAIN RFID |
| Chip | Impinj Monza 4QT |
| Memory | 128-bit EPC, 512-bit user memory, 96-bit TID with a 48-bit serial number |
| Chip read sensitivity | −19.5 dBm (vendor reference) Vendor-specified measurement conditions; not finished-tag performance |
| Antenna size | On request |
| Format | Inlay (dry / wet / label) |
| Typical applications | Utility meters |
Design and application notes
Monza 4QT UHF RFID Inlay, AZ-M4QT-S01 is a passive UHF RFID inlay design with the Impinj Monza 4QT chip on a dipole antenna for the 860–960 MHz band. Its antenna dimensions are shared on request: tell us the item and the label position, and we will confirm whether it fits and send samples.
Impinj Monza 4QT provides 128-bit EPC, 512-bit user memory, 96-bit TID with a 48-bit serial number. Impinj lists read sensitivity of −19.5 dBm and write sensitivity of −16.7 dBm as vendor reference values (Vendor-specified measurement conditions; not finished-tag performance). Validate the complete tag with samples on the intended item and reader setup. Datasheet highlights: QT technology with public/private data profiles and short-range mode, True3D dual antenna ports, FastID and TagFocus.
We do not publish a read range for this design. Range depends on the reader, antenna, power and tagged material, so ask us for test data or samples for your setup.
It is typically used for utility meter identification. The application pages below give chip and size recommendations for each industry.
Order it as a dry inlay for your own converting, a wet inlay with adhesive and liner, or a finished label, blank or printed and EPC-encoded. We ship samples first so you can validate on your own items and readers, then quote the format you tested.
Specification basis and validation
Vendor documents describe the chip, not finished-tag read range.
Confirm catalog dimensions against the final tag construction. Reference read ranges require sample testing on your item with your reader setup.
Order in the format you need
Confirm the construction and encoding during sampling, then quote the configuration you validated.
Dry inlay
Chip and antenna on a PET carrier without adhesive, for your own converting, hang tags or lamination.
Wet inlay
The same inlay with pressure-sensitive adhesive on a liner, applied like a sticker.
Label
Paper or synthetic face stock over the inlay, blank or printed, ready for RFID printers.
Custom
Other label sizes, face stocks, adhesives, printing, encoding and roll formats on request.
What should the sample pass before a bulk order?
Agree the actual use conditions and pass criteria before selecting samples. The catalogue supports shortlisting; confirm finished-tag performance and delivery configuration in writing and through sample validation.
-
Fix the actual reader and item conditions
Record the deployment region, reader, antenna, power, item material and tag position. Test realistic density, orientation and movement; define which items must be read and which must remain excluded.
-
Check RF, encoding and conversion separately
Record missed and unintended reads by unique identity. Read back the EPC against source data and printed IDs. Test the final roll on the specified printing and encoding equipment, and assess adhesion and mounting separately.
-
Record the approved construction and delivery configuration
Record the SKU, sample revision, lot, device settings, results and approver. Confirm final dimensions, materials, printing, encoding, quantity and delivery requirements, and agree which configuration changes require another trial.
Use the test record to save actual conditions and results. English and Chinese worksheets are provided; the agreed reviewer determines acceptance.
Download test recordHow ordering works
- 01
Specify
Share surface, read distance, chip preference and volume. We shortlist tags that fit.
- 02
Sample
Receive sample tags of the shortlisted designs to try in your own setup.
- 03
Validate
Test on your items, readers and printers. We adjust chip, size or format if needed.
- 04
Produce & ship
Volume production with 100% inline electrical test, then export shipping.
Frequently asked questions
Can I order the AZ-M4QT-S01 as a wet inlay or a printed label?
What read range will I get with the AZ-M4QT-S01?
How do I get samples and a quote for the AZ-M4QT-S01?
Selection guides
-
Dry Inlay, Wet Inlay or RFID Label: What Are You Buying?
Understand dry inlays, adhesive wet inlays and converted labels. Specify the antenna, finished dimensions and roll format so your RFID order is usable.
-
UCODE, Monza and Higgs: Compare UHF RFID Chips
Compare UHF chip memory, reader features and lifecycle support. Use official datasheets to shortlist chips, then test the complete inlay on your items.
Related designs
AZ-M4-S01
Monza 4 UHF RFID Inlay, AZ-M4-S01
- Chip options
- Monza 4D / Monza 4E / Monza 4QT
- Antenna size
- On request
AZ-M4-S02
Monza 4 UHF RFID Inlay, AZ-M4-S02
- Chip options
- Monza 4D / Monza 4E / Monza 4QT
- Antenna size
- On request
AZ-M4-S03
Monza 4 UHF RFID Inlay, AZ-M4-S03
- Chip options
- Monza 4D / Monza 4E / Monza 4QT
- Antenna size
- On request
Talk to an RFID engineer
Not sure which tag fits your project?
Send the surface, read distance and volume. An engineer replies within 24 hours with a recommendation and a sample plan.
Email us: sales@antenza.com