Monza 4QT UHF RFID Inlay, AZ-M4QT-S02: spec drawing (UHF, Impinj Monza 4QT)
UHF Impinj Monza 4QT

AZ-M4QT-S02

Monza 4QT UHF RFID Inlay, AZ-M4QT-S02

Monza 4QT UHF RFID inlay design; antenna dimensions and test data are available on request.

Full dimensions for this design are available on request. Ask for the specification and samples before ordering.

Get a quote Request samples

Validate samples first. Engineer reply within 24 h.

Specifications
SKU AZ-M4QT-S02
Frequency UHF 860–960 MHz
Protocol EPC Gen2v2 (ISO/IEC 18000-63), RAIN RFID
Chip Impinj Monza 4QT
Memory 128-bit EPC, 512-bit user memory, 96-bit TID with a 48-bit serial number
Chip read sensitivity up to −19.5 dBm vendor datasheet value for the bare chip, not the finished tag
Antenna size On request
Format Inlay (dry / wet / label)
Typical applications Utility meters

Design and application notes

Monza 4QT UHF RFID Inlay, AZ-M4QT-S02 is a passive UHF RFID inlay design with the Impinj Monza 4QT chip on a dipole antenna for the 860–960 MHz band. Its antenna dimensions are shared on request: tell us the item and the label position, and we will confirm whether it fits and send samples.

Impinj Monza 4QT provides 128-bit EPC, 512-bit user memory, 96-bit TID with a 48-bit serial number. Impinj specifies a read sensitivity of up to −19.5 dBm and a write sensitivity of up to −16.7 dBm for the bare chip; the range of the finished tag also depends on the antenna, the reader and the tagged material. Datasheet highlights: QT technology with public/private data profiles and short-range mode, True3D dual antenna ports, FastID and TagFocus.

We do not publish a read range for this design. Range depends on the reader, antenna, power and tagged material, so ask us for test data or samples for your setup.

Buyers typically use this UHF RFID inlay for utility meter identification.

The same chip and antenna are available as dry inlay, wet inlay or label; printing, EPC encoding and custom label sizes are quoted on request. Start with samples, then move to volume once the tag passes your tests; volume orders are produced with our ISO 9001-certified production partner and 100% electrically tested inline.

Order in the format you need

Confirm the construction and encoding during sampling, then quote the configuration you validated.

  • Dry inlay

    Chip and antenna on a PET carrier without adhesive, for your own converting, hang tags or lamination.

  • Wet inlay

    The same inlay with pressure-sensitive adhesive on a liner, applied like a sticker.

  • Label

    Paper or synthetic face stock over the inlay, blank or printed, ready for RFID printers.

  • Custom

    Other label sizes, face stocks, adhesives, printing, encoding and roll formats on request.

How ordering works

  1. 01

    Specify

    Share surface, read distance, chip preference and volume. We shortlist tags that fit.

  2. 02

    Sample

    Receive sample tags of the shortlisted designs to try in your own setup.

  3. 03

    Validate

    Test on your items, readers and printers. We adjust chip, size or format if needed.

  4. 04

    Produce & ship

    Volume production with 100% inline electrical test, then export shipping.

Frequently asked questions

Can I order the AZ-M4QT-S02 as a wet inlay or a printed label?
Yes. The same chip and antenna are available as a dry inlay (no adhesive), a wet inlay (adhesive on a liner) or a label with paper or synthetic face stock, blank or printed. EPC encoding and custom label sizes are quoted on request; see custom tags.

What read range will I get with the AZ-M4QT-S02?
We do not publish a read range for this design. Real-world range depends on the reader, antenna, power and the tagged material, so we recommend testing samples in your setup.

How do I get samples and a quote for the AZ-M4QT-S02?
Use the quote button on this page or request samples. Tell us the item, surface, read distance and annual volume; an engineer replies within 24 hours with a recommendation and a sample plan.

Selection guides

Related designs

Talk to an RFID engineer

Not sure which tag fits your project?

Send the surface, read distance and volume. An engineer replies within 24 hours with a recommendation and a sample plan.

Get a quote in 24 h Request samples

Email us: sales@antenza.com

Quick quote

Monza 4QT UHF RFID Inlay, AZ-M4QT-S02

AZ-M4QT-S02

Tell us the quantity and where the tag goes. We reply within 24 hours.

An engineer replies within 24 hours.

By sending this form you agree to our privacy policy. We use your details to answer and follow up on this inquiry.
Email us Get a quote in 24 h