Catalogue illustration. Confirm the actual appearance and supplied construction before selection.
AZ-U9-30X15
UCODE 9 UHF RFID Inlay, 30 × 15 mm
A 30 × 15 mm UHF RFID inlay on UCODE 9, available as dry inlay, wet inlay or finished label.
Validate samples first. Engineer reply within 24 h.
Check suitability for your application
See the sample validation checklist
| SKU | AZ-U9-30X15 |
|---|---|
| Frequency | UHF 860–960 MHz |
| Protocol | EPC Gen2v2 (ISO/IEC 18000-63), RAIN RFID |
| Chip | NXP UCODE 9 |
| Memory | 96-bit EPC (pre-serialization supported), 96-bit TID with a 48-bit unique serial number, no user memory |
| Chip read sensitivity | −24 dBm (vendor reference) Vendor measurement conditions: 2.15 dBi gain antenna; not finished-tag performance |
| Antenna size | 30 × 15 mm |
| Format | Inlay (dry / wet / label) |
| Read range | up to 6 m (reference) depends on reader, antenna, power and the tagged material |
| Typical applications | Apparel & footwear |
PDF · English / 中文
Catalogue selection information; confirm the final construction and performance through drawings and samples.
Design and application notes
UCODE 9 UHF RFID Inlay, 30 × 15 mm is a passive UHF RFID inlay for the 860–960 MHz RAIN RFID band. It pairs the NXP UCODE 9 chip with a 30 × 15 mm dipole antenna, a compact footprint for tags and labels with limited space.
NXP UCODE 9 provides 96-bit EPC (pre-serialization supported), 96-bit TID with a 48-bit unique serial number, no user memory. NXP lists read sensitivity of −24 dBm and write sensitivity of −22 dBm as vendor reference values (Vendor measurement conditions: 2.15 dBi gain antenna; not finished-tag performance). Validate the complete tag with samples on the intended item and reader setup. Datasheet highlights: Self-Adjust auto-tuning, Memory Safeguard data integrity, dynamic backscatter and a pre-serialized 96-bit EPC; works with single-slit antennas.
Reference read range: up to 6 m (reference). Real-world range depends on the reader, antenna, power and the material the tag is attached to, so treat it as a comparison value and confirm it with samples on your own items.
Buyers typically use this UHF RFID inlay for apparel hang tags, care labels and price tickets.
The same chip and antenna are available as dry inlay, wet inlay or label; printing, EPC encoding and custom label sizes are quoted on request. Start with samples, then move to volume once the tag passes your tests; volume orders are produced with our ISO 9001-certified production partner and 100% electrically tested inline.
Specification basis and validation
Vendor documents describe the chip, not finished-tag read range.
Confirm catalog dimensions against the final tag construction. Reference read ranges require sample testing on your item with your reader setup.
Order in the format you need
Confirm the construction and encoding during sampling, then quote the configuration you validated.
Dry inlay
Chip and antenna on a PET carrier without adhesive, for your own converting, hang tags or lamination.
Wet inlay
The same inlay with pressure-sensitive adhesive on a liner, applied like a sticker.
Label
Paper or synthetic face stock over the inlay, blank or printed, ready for RFID printers.
Custom
Other label sizes, face stocks, adhesives, printing, encoding and roll formats on request.
What should the sample pass before a bulk order?
Agree the actual use conditions and pass criteria before selecting samples. The catalogue supports shortlisting; confirm finished-tag performance and delivery configuration in writing and through sample validation.
-
Fix the actual reader and item conditions
Record the deployment region, reader, antenna, power, item material and tag position. Test realistic density, orientation and movement; define which items must be read and which must remain excluded.
-
Check RF, encoding and conversion separately
Record missed and unintended reads by unique identity. Read back the EPC against source data and printed IDs. Test the final roll on the specified printing and encoding equipment, and assess adhesion and mounting separately.
-
Record the approved construction and delivery configuration
Record the SKU, sample revision, lot, device settings, results and approver. Confirm final dimensions, materials, printing, encoding, quantity and delivery requirements, and agree which configuration changes require another trial.
Use the test record to save actual conditions and results. English and Chinese worksheets are provided; the agreed reviewer determines acceptance.
Download test recordHow ordering works
- 01
Specify
Share surface, read distance, chip preference and volume. We shortlist tags that fit.
- 02
Sample
Receive sample tags of the shortlisted designs to try in your own setup.
- 03
Validate
Test on your items, readers and printers. We adjust chip, size or format if needed.
- 04
Produce & ship
Volume production with 100% inline electrical test, then export shipping.
Frequently asked questions
Can I order the AZ-U9-30X15 as a wet inlay or a printed label?
What read range will I get with the AZ-U9-30X15?
How do I get samples and a quote for the AZ-U9-30X15?
Selection guides
-
RFID Hang Tags for Apparel: Placement, Encoding and Approval
Specify apparel RFID hang tags by attachment, artwork, inlay position and serialized identity. Test folded, packed and displayed garments before approval.
-
Dry Inlay, Wet Inlay or RFID Label: What Are You Buying?
Understand dry inlays, adhesive wet inlays and converted labels. Specify the antenna, finished dimensions and roll format so your RFID order is usable.
Related designs
Talk to an RFID engineer
Not sure which tag fits your project?
Send the surface, read distance and volume. An engineer replies within 24 hours with a recommendation and a sample plan.
Email us: sales@antenza.com